Soak it in water for 10 to 20 minutes before making it so that the 2mm solution (Latane) is more flexible.
Please prepare 13 blades and 24 extra wings.
Fold the 13 flexible wings lightly in half and hold the center line.
Make a six-by-six, seven-by-seven hallucination + shape and rotate each meal.
Put the sariot in the direction of the 6 blades below.
Turn the ladder to the left twice to prevent the wing from moving.
Turn the sari-tip counter and turn it twice to the right.
Please put the first sari in a short.
Place the scaffold in the direction of joining it, and then assemble the blade in two rows.
Please weave them up and down.
Wire up and down and make 10cm in diameter.
Repeat up and down to maintain the spacing between the blades.
Make sure that there are no gaps.
Size check!
Prepare 24 30cm extra blades cut with diagonal lines.
Free up space on both sides of the two wings and place on both sides of the wing except for Article 1.
Spray water in the middle of the making to prevent the log from drying out.
Twist the wings into groups of two and a diameter of 12cm.
Tie them up and down, aligning them between the blades.
Size check!
Please prepare a new sari stick and twist it into two rows.
Turn back on the second blade in turn to form the first sari.
When overlaps with the beginning, slide the sari stick back from the wing
Please move the second sari to the back of the wing.
I'd like to have a two-line arrangement.
Spray water on a wing and soak it well.
Prepare two rows of sari band and twist them into two lines, then bend the blade to 90 degrees.
Cut the bottom 90 degrees, make the sides of the basket, and spray the blade with enough water to make it break.
When superimposed on the beginning, move the blade back.
Turn the next saridae back and cut the first of the two wings with diagonal lines.
Please take a sari with you to the front of the wing
Twist the 90-degree turn at 30 degrees and make it 6cm.
Cut the short slats from the middle of the wing into diagonal lines and weave them into new ones.
Keep the space between the blades and weave them together.
In between, weave.
Size check!
Prepare two new sariats and put them between the wings and twist them into three lines twice.
Wind the first sari around the back of the third wing in turn.
When overlaps with the beginning, slide the sari stick back from the wing
Please move the next two sariats to the back of the wing.
Please take the sarira reliquary from the back and twist it into three rows.
When overlaps with the beginning, slide the sari stick back from the wing
Please move the next two sariats to the back of the wing.
Please cut off the sardines.
We're going to wrap up the last two times.
Turn the first wing into the second wing and move it forward.
Turn the second wing into the third wing and move it forward.
Turn the third wing into the fourth wing and move it forward.
Place the first of the three removed wings between the two.
Turn the front wing into the next one and move it forward.
Place the first of the three removed wings between the two.
Repeat like this.
Last 3 days, move the public first day out from the inside.
Please add the other two wings in turn.
Set the overall shape and sprinkle with water.
Please lean back and wrap it up.
Place one wing on top of the second wing.
Repeat the second wing for the third day.
Don't leave out the inside wing, and weave one by one.
Please put the last wing back into the one that was first returned.
Please cut the inner wing into diagonal pieces.
Turn back and cut out long lines of hallucinations on the floor.
I'd like to have my inner floor shaving arranged.
Please make the finished latan look pretty.
Không có nhận xét nào:
Đăng nhận xét