Today we're going to show you a how to operate the pacer industries
4000 digital anemometer the DNA 4000 is switched on by pressing the on/off switch
Pressing it a second time will turn the unit off
To check the display segments press and hold the on/off switch
Pressing mps will be of indicating measuring value in meters per second to decimal resolution
Pressing F p.m. Will give indicated measuring value at feet per minute
2 second measuring time in actual operation the da 4000 will take the actual speed every 3 seconds
16 seconds rate I'm in this operation da 4000 indicate the arithmetic average measuring value of over 8 members
When pressing the 16 second body 16 second measuring integration time will start very mean in during the integration time
The display will indicate 16 SEC after year after the arithmetic average measuring value is indicated
This value will be updated every two seconds every time the 16 second button is pressed. The integration time would be restarted
When pressing the max button the highest value will be indicated when pressing the min button the lowest value will be indicated
All right. So you gonna turn it on we're gonna push F to him and 16 seconds. You're gonna move the probe around the register
We got 139 that is your average of 8 8 readings over a 16 second time
Không có nhận xét nào:
Đăng nhận xét